Overview of the imageRUNNER 3045/3035/3030/ 3025

Most operations on this machine are executed from the touch panel display. By pressing the keys according to the instructions on the touch panel display, you can utilize almost all of the functions of this machine.

CAUTION

Press the touch panel display keys gently with your fingers or the edit pen. Do not press the touch panel display with a pencil, ballpoint pen, or other sharp objects that can scratch the surface of the touch panel display or break it.

NOTE

Before using the touch panel display, peel off the protective film from the display.

The Touch Panel Display

Keys for using the machine's main functions are located on the top of the touch panel display. To use any of the desired function's features, you must first press the key for the desired function. The area on the bottom of the touch panel display is used for messages that indicate the status of the machine. The System Monitor key, which enables you to check the status of the various devices, jobs, and consumables, is also displayed here.

Switching the Functions Indicated on the Touch Panel Display

After the power is turned ON, the following screen appears on the touch panel display. You can press [Copy], [Send], [Mail Box], [Print Job], [Scan], or [System Monitor] to change functions. (See "Initial Function at Power ON," on p. 4-26.)To display other functions, such as an installed MEAP (Multifunctional Embedded Application Platform) application, press [➞].

NOTE

•For information on the various keys displayed on the touch panel display, see "Various Touch Panel Display Screens," on p. 2-7.

•You can set the initial screen (the first screen that appears when the machine is turned ON) from the Additional Functions screen. The initial screen can be the Copy, Send or Fax, Mail Box, Print Job, MEAP, or System Monitor screen.

2

Basic Operations

Overview of the imageRUNNER 3045/3035/3030/3025

2-5