Automatic Feeder Cleaning

If your originals have black streaks or appear dirty after scanning them through the feeder, clean the rollers of the feeder.

IMPORTANT

This procedure is necessary only if the optional Feeder (DADF-N1) (standard-equipped for the imageRUNNER 3045/3035) is attached.

NOTE

It takes approximately 20 seconds to clean the feeder.

1 Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞

[Feeder Cleaning].

2 Place 10 sheets of blank paper into the feeder ➞ press [Start].

Make sure that you fan the sheets of paper well.

Use LTR paper (16 to 20 lb bond (60 to 80 g/m2)).

When cleaning is complete, try scanning again.

NOTE

To cancel feeder cleaning while it is in progress, press [Cancel].

7

Routine Maintenance

Routine Cleaning

7-57