Canon 3025, 3030, 3035, 3045 Job Duration Display, Setting an Output Tray to Hold Different Paper Sizes, Duration Display], 2 Select [On] or [Off] ➞ press [OK]

4

Customizing Settings

Job Duration Display

If the Job Duration Display mode is set to 'On', the remaining time that it takes to complete an operation is displayed in minutes on the touch panel display.

NOTE

•The wait time is displayed as <Approx Prt Time> (approximate printing time) on the screen that is displayed when the machine is printing.

•Even if Job Duration Display is set to 'On', the wait time is not displayed if the wait time is less than one minute.

1Press (Additional Functions) ➞ [Common Settings] ➞[JobDuration Display].2Select [On] or [Off] for each function ➞press [OK].Setting an Output Tray to Hold Different Paper Sizes

This mode enables you to output different paper sizes to the same output tray.

IMPORTANT

This mode is available only if an optional finisher is attached.

1 Press (Additional Functions) ➞ [Common Settings] ➞

[Different Paper Sizes for the Output Tray].

2 Select [On] or [Off] ➞ press [OK].

If Different Paper Sizes for the Output Tray is set to 'Off', and the message <Remove the paper from the output tray.> is displayed, printing stops. Remove all of the paper from the output tray, and printing resumes.

If both the Different Size Originals and Staple modes are set, outputs are stapled and collated, regardless of the Different Paper Sizes settings.

4-54Specifying Common Settings