4

Customizing Settings

NOTE

[Limited Functions Mode] is displayed only if an optional finisher is attached.

1 Press (Additional Functions) ➞ [Common Settings] ➞

[Limited Functions Mode].

2 Select [On] or [Off] ➞ press [OK].

NOTE

The Limited Functions Mode is enabled only after you restart the machine (the main power switch is turned OFF, and then back ON). For instructions on restarting (turning the main power switch OFF and then ON) the machine, see "Main Power and Control Panel Power," on p. 1-15.

Returning the Common Settings to Their Defaults

You can restore all of the Common Settings to their defaults (initial settings).

NOTE

•If you set Language Switch to 'On', and then return the Common Settings to their default settings, Language Switch is turned 'Off', but the language shown on the touch panel display remains unchanged. (See "Changing the Language Shown on the Touch Panel Display," on p. 4-50.)

•If you set Limited Functions Mode to 'On', and then return the Common Settings to their default settings, the setting for the Limited Functions Mode remains unchanged.

•Image forms registered for Register Form for Form Composition are not erased.

1Press (Additional Functions) ➞ [Common Settings] ➞

[Initialize Common Settings].2Press [Yes].

4-56Specifying Common Settings