2-964
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port trap
show port trap
To display port trap status, use the show port trap command.
show port trap [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value , the p orts on a ll modules ar e shown. If you do not specify a port value,
all the ports on the module are shown.
Examples This example shows how to display the port trap status for a specific module:
Console> show port trap 1
Port Trap
----- --------
1/1 disabled
1/2 enabled
1/3 disabled
1/4 disabled
Console>
Related Commands se t port trap
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.