Cisco Systems 6500 set logging callhome

2-339
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set logging callhome
set logging callhome
To enable or disable the CallHome feature, use the set logging callhome command.
set logging callhome {enable | disable}
Syntax Description
Defaults CallHome functionality is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines If you disable CallHome, only CallHome functionality is affected. To disable a specific parameter, you
must clear each parameter individually.
Examples This example shows how to enable the CallHome functionality:
Console> (enable) set logging callhome enable
Callhome functionality is enabled.
Callhome messages will be sent to the configured destination addresses.
Console> (enable)
This example shows how to disable the CallHome functionality:
Console> (enable) set logging callhome disable
Callhome functionality is disabled.
Callhome messages will not be sent to the configured destination addresses.
Console> (enable)
enable Enables CallHome functionality.
disable Disables CallHome functionality.