2-598
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set spantree global-default
set spantree global-defaultTo set the global states on the switch, use the set spantree global-default command.
set spantree global-default portfast {enable | disable}
set spantree global-default loop-guard {enable | disable}
set spantree global-default bpdu-guard {enable | disable}
set spantree global-default bpdu-filter {enable | disable}
Syntax Description
Defaults All ports are in nonedge state.
Loop guard is disabled on all ports.
BPDU guard is disabled on all ports.
BPDU filter is disabled on all ports.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to disable the global PortFast state on the s witc h:
Console> (enable) set spantree global-default portfast disable
Spantree global portfast state disabled on this switch.
Console> (enable)
This example shows how to enable the global loop guard state on the switch:
Console> (enable) set spantree global-default loop-guard enable
Spantree global loop-guard state enabled on the switch.
Console> (enable)
This example shows how to disable the global BPDU guard state on the switch:
Console> (enable) set spantree global-default bpdu-guard disable
Spantree global-default bpdu-guard disabled on this switch.
Console> (enable)
portfast Sets the global PortFast state.
enable Enables the global state.
disable Disables the global state.
loop-guard Sets the global loop guard state.
bpdu-guard Sets the global BPDU guard state.
bpdu-filter Sets the global BPDU filter state.