2-267
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set errdisable-timeout
You can enable or disable errdi sable time out for ea ch of the reasons that ar e listed . If yo u specify "o ther ,"
all ports errdisabled by causes other than the reasons listed are enabled for errdisable timeout . If you
specify "all," all ports errdisabled for any reason are enabled for errdisable timeout.
You can manually prevent a port from being reenabled by setting the errdisable timeout for that port to
disable using the set port errdisable-timeout mod/port disable command.
Examples This example shows how to enable an errdisable timeout due to a BPDU port-guard event:
Console> (enable) set errdisable-timeout enable bpdu-guard
Successfully enabled errdisable-timeout for bpdu-guard.
Console> (enable)
This example shows how to set an errdisable timeout interval to 450 seconds:
Console> (enable) set errdisable-timeout interval 450
Successfully set errdisable timeout to 450 seconds.
Console> (enable)
This example shows how to set an errdisable timeout for broadcast suppression events:
Console> (enable) set errdisable-timeout enable bcast-suppression
Successfully enabled errdisable timeout for bcast-suppression.
Console> (enable)
This example shows how to set an errdisable timeout for ARP inspection events:
Console> (enable) set errdisable-timeout enable arp-inspection
Successfully enabled errdisable-timeout for arp-inspection.
Console> (enable)
Related Commands set port errdisable-timeout
show errdisable-timeout