2-921
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port channel
3/3 enabled normal disabled
3/4 enabled normal disabled
Console>
Console> (enable) show port channel 1 info gvrp
Port GVRP GVRP GVRP
status registeration applicant
----- -------- ------------- ---------
1/1 disabled normal normal
1/2 disabled normal normal
Console>
Console> (enable) show port channel 1 info qos
Port Qos-Tx Qos-Rx Qos-Trust Qos-DefCos Qos-Interface
PortType PortType Type Type
----- -------- -------- ------------ ---------- --------------
1/1 2q2t 1q4t untrusted 0 port-based
1/2 2q2t 1q4t untrusted 0 port-based
----- -------- -------- ------------ ---------- --------------
Port ACL name Type
----- -------------------------------- ----
1/1 IP
IPX
MAC
1/2 IP
IPX
MAC
Port Policy Source
----- -------------
1/1 COPS
1/2 COPS
Console>
Table 2 -68 describes the possible fields (depending on the type of port queried) and the values in the
show port channel command outputs.
Table2-68 show port channel Command Outputs Fields
Field Description
Port Module and port number.
Status Channeling status of the port (connected, notconnect).
Channel mode Status of whether EtherChannel is on, off, auto, or desirable on the
port.
Admin Group Number of the admin group.
PAgP Pkts Transmitted Number of PAgP packets transmitted.
PAgP Pkts Received Number of PAgP packets received.
PAgP Pkts InFlush Number of PAgP flush packets received.
PAgP Pkts RetnFlush Number of PAgP flush packets returned.
PAgP Pkts OutFlush Number of PAgP flush packets transmitted.
PAgP Pkts InError Number of PAgP error packets received.
Channel ID Number of the channel group.
Neighbor device Neighboring device with which the port is channeling.
Neighbor port Port on the neighboring device with w hich the p ort is c hanne li ng.