2-922
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port channel
Speed Speed setting for the port (auto, 10, 100, 1000).
Duplex Duplex setting for the port (auto, full, half).
Vlan VLAN to which the port belongs.
Port priority Priority associated with the port.
PortSecurity/Dynamic
port Status of whether the port is secure or dynamic.
ifIndex Interface number to which the port belongs.
Oper-group Capability of the group.
Neighbor device-id Device ID of the neighboring device with which the port is
channeling.
Neighbor port-id Port ID of the neighboring device with which the port is
channeling.
Neighbor Oper-group Capability of the neighboring device.
Oper-Distribution Frame distribution method operating status on a per-port basis (ip
source, ip destination, ip both, mac source, mac destination, mac
both, hotstandby-active, or hotstandby-idle).
Trunk-status Status of whether the port is trunking or not.
Trunk-type Type of trunk port.
Trunk-vlans VLANs to which the port belongs.
Portvlancost-vlans Port VLAN cost.
Portfast Status of whether the PortFast-start mode is enabled or disabled.
Port vlanpri Port VLAN priority.
Port vlanpri-vlans Priority VLAN number.
IP Status of the IP protocol (on, off, auto).
IPX Status of the IPX protocol (on, off, auto).
Group Status of the VINES, AppleTalk, and DECnet protocols (on, off,
auto).
GMRP status Status of whether GMRP is enabled or disabled.
GMRP registration Status of the administrative control of an outbound port (norma l,
fixed, forbidden).
GMRP forward/all Status of whether the Forward All feature is enabled or disabled.
GVRP status Status of whether G VRP is e nab led or disa bled .
Table2-68 show port channel Command Outputs Fields (continued)
Field Description