2-912
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port capabilities
This example shows the port capabilities on a 48-port 10/100BASE-TX switching services configured-module:
Console> show port capabilities 3/2
Model WS-X6248-RJ-45
Port 3/2
Type 10/100BaseTX
Speed auto,10,100
Duplex half,full
Trunk encap type 802.1Q,ISL
Trunk mode on,off,desirable,auto,nonegotiate
Channel yes
Broadcast suppression percentage(0-100)
Flow control receive-(off,on),send-(off)
Security yes
Membership static
Fast start yes
QOS scheduling rx-((null)),tx-((null))
QOS classification layer 2,layer 3
UDLD Capable
SPAN source,destination
Inline power auto,on,off
Auxiliaryvlan 1..1000,dot1p,untagged,none
Console>
This example shows the port capabilities on an 8-port T1/E1 ISDN PRI services configured-module:
Console> show port capabilities 3/2
Model WS-X6608-T1 (or WS-X6608-E1)
Port 3/2
Type T1, transcoding, conferencing
Speed 1.544 Mps (or 2.048Mps)
Duplex full
Channel no
Broadcast suppression no
Flow control no
Security no
Membership no
Fast start no
QOS scheduling no
QOS classification no
UDLD no
Inline power no
Auxiliaryvlan no
Console>