2-971
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port voice active
show port voice active
To display active call information on a port, use the show port voice active command.
show port voice active [mod/port] [all | call | conference | transcode] [ipaddr]
Syntax Description
Defaults The default is all active calls are displayed.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The information displayed when using the show port voice active command is not available through the
supervisor engine SNMP agent.
The call keyword is supported by the 24-port FXS analog interface and the 8-port T1/E1 PSTN interface
modules.
The conference and transcode keywords are supported by the 8-port T1/E1 PSTN interface module.
You can use the optional mod or mod/port variables to display calls that belong to the specified module or
port in detailed format.
There are up to 8 calls per port for the 8-port T1/E1 ISDN PRI services-configured module but only one
call per port for the 24-port FXS analog station interface services-configured module.
The ipaddr option displays one specific call for the specified IP address. You can also use an IP alias.
This command is not supported by the NAM.
mod/port (Optional) Number of the module and port on t he mo dul e.
all (Optional) Dis plays all calls (regular calls, conference calls, and transcoding
calls) in the system.
call (Optional) Displays call information for the 24-port FXS analog interface
and the 8-port T1/E1 PSTN interface modules.
conference (Optional) Displays call information for the 8-port T1/E1 PSTN interface
module configured for conferencing.
transcode (Optional) Displays call information for the 8-port T1/E1 PSTN interface
module configured for transcoding.
ipaddr (Optional) Remote IP address.