2-494
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set qos dscp-mutation-table-map
set qos dscp-mutation-table-map
To configure the DSCP mutation table map, use the set qos dscp-mutation-table-map command.
set qos dscp-mutation-table-map mutation_table_id vlan_list
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The PFC3 supports 16 DSCP mutation maps. QoS uses one mutation map for the default mapping. You
can configure 15 mutation maps.
Examples This example shows how to set DSCP mutation table map 1 for VLANs 1 through 10:
Console> (enable) set qos dscp-mutation-table-map 1 1-10
VLANs 1-10 mapped to mutation-table-id 1.
Console> (enable)
Related Commands clear qos dscp-mutation-table-map
show qos maps
mutation_table_id Number of the mutation table; valid values are from 1 to 15.
vlan_list VLAN numbers that form a VLAN list; valid values are from 1 to 1001 and
from 1025 to 4094.