2-1118
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show system info-log
show system info-log
To display the configuration of the system information logging feature, use the show system info-log
command.
show system info-log
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to display the system information logging con figuration:
Console> (enable) show system info-log
System Logging Host File Interval
-------------- --------------- ----------------------------------- --------
Enabled 10.5.2.10 tftp:logging 1500
Index System Command
----- ----------------------------------------------------------
1 show version
2 show module
3 show version
4 show config
Console> (enable)
Table 2 -95 describes the fields in the show system command output.
Related Commands clear config
clear system info-log command
set system info-log
Table2-95 show system info-log Command Output Fields
Field Description
System Logging Status of system information logging (enabled or disabled).
Host IP address or IP alias of the host.
File Type of server and name of the file.
Interval Number of minutes in between system information logging events.
Index Number of the show command entry in the system informatio n
logging list.
System Command Show command whose output is logged to the TFTP or RCP server.