2-104
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear security acl log flow
clear security acl log flow
To clear all flows in the security ACL log table, use the clear security acl log flow command.
clear security acl log flow
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is supported on systems configured with Supervisor Engine 2 with Layer 3 Switching
Engine II (PFC2) only.
Examples This example shows how to clear all flows in the security ACL log table:
Console> (enable) clear security acl log flow
Security acl log table cleared successfully
Console> (enable)
Related Commands set security acl log
show security acl log