2-739
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
show config mode
show config mode
To display the system configuration mode currently running on the switch, use the show config mode
command.
show config mode
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to display the current system configuration mode when set to text:
Console> (enable) show config mode
System configuration mode set to text.
System configuration file = bootflash:switch.cfg
auto-save to nvram disabled
auto-save interval set to 45
Console> (enable)
This example shows how to display the current system configuration mode when set to binary:
Console> (enable) show config mode
System configuration mode set to binary.
auto-save to nvram disabled
auto-save interval set to 4320
Console> (enable)
This example shows how to display the current system configuration when the configuration mode is set
to text and when the text configuration is saved in NVRAM:
Console> (enable) show config mode
System configuration mode set to text.
System configuration file set to nvram.
auto-save to nvram enabled
auto-save interval set to 2880
Console> (enable)
Related Commands set config mode