2-418
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set port enable
set port enable
To enable a port or a range of ports, use the set port enable command.
set port enable mod/port
Syntax Description
Defaults The default is all ports are enabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
It takes approximately 30 seconds for this command to take effect.
Examples This example shows how to enable port 3 on module 2:
Console> (enable) set port enable 2/3
Port 2/3 enabled.
Console> (enable)
Related Commands set port disable
show port
mod/port Number of the module and the port on the module.