2-197
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
reset—ROM monitor
reset—ROM monitor
To perform a soft reset of the switch, use the reset ROM monitor command.
reset [-s]
Syntax Description
Defaults The default Flash device is slot0.
Command Types ROM monitor command.
Command Modes Normal.
Usage Guidelines This command will not boot the MSFC if the PFC is not present in the Catalyst 6500 series switch.
Examples This example shows how to use the reset command:
rommon 26 > reset
System Bootstrap, Version 3.1(1.69)
Copyright (c) 1994-1997 by cisco Systems, Inc.
Supervisor processor with 16384 Kbytes of main memory
rommon 1 >
===========================================================================
-s (Optional) Resets the entire switch.