2-194
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands reload
reloadTo force a module to accept a download through SCP, use the reload command. This command resets
the module and prompts you to initiate a download when the reset is complete.
reload module
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is used if a module is accidently reset during the downloading of an image. After the
reset, a normal download will not work. You must enter the reload module command followed by the
download host file [mod] command.
Examples This example shows how to reset module 3 and download the acpflash_1111.bbi file from the mercury
host to the module:
Console> (enable) reload 3
Console> (enable) download mercury acpflash_1111.bbi 3
This command will reset Module 3.
Download image acpflash_1111.bbi from mercury to Module 3 FLASH (y/n) [n]? y
/
Done. Finished network download. (1964012 bytes)
Console> (enable)
Related Commands download
module Number of the module.