2-1024
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show rspan
show rspan
To display the remote SPAN configuration, use the show rspan command.
show rspan
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The fields displayed depends on the configuration. For example, if this is a source session, the
Destination, Incoming Packets, and Learning f ields ar e not dis pla yed. If t his is a destin ation sessi on, the
Admin Source, Oper Source, Direction, Multicast, Filter, and Max Bandwidth fields are not displayed.
If there is no VLAN filtering on the source session, the Filter field is not displayed.
Examples This example shows the display output from the show rspan command:
Console> (enable) show rspan
Destination : -
Rspan Vlan : 900
Admin Source : VLAN 50
Oper Source : Port 2/1,2/3,2/5,2/7,2/9,2/11,2/13,2/15,2/17,2/19
Direction : receive
Incoming Packets: -
Learning : -
Multicast : disabled
Filter : 10,20,30,40,500,600,700,800,900
Status : active
--------------------------------------------
Destination : Port 3/1
Rspan Vlan : 901
Admin Source : -
Oper Source : -
Direction : -
Incoming Packets: disabled
Learning : disabled
Multicast : -
Filter : -
Status : active
--------------------------------------------