2-55
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear logging level
clear logging levelTo reset the logging level for a facility or for all facilities to their default settings, use the clear logging
level command.
clear logging level {facility | all}
Syntax Description facility Name of the facility to reset; facility types are listed in Table 2- 1.
all Resets all facilities.
Tab le 2 -1 Fac ili ty Typ es
Facility Name Definition
all All facilities
acl access control list
cdp Cisco Discovery Protocol
cops Common Open Policy Service Protocol
dtp Dynamic Trunking Protocol
dvlan Dynamic VLAN
earl Enhanced Address Recognition Logic
filesys file system facility
gvrp GARP VLAN Registration Protocol
ip Internet Protocol
kernel Kernel
ld ASLB facility
mcast Multicast
mgmt Management
mls Multilayer Switching
pagp Port Aggregation Protocol
protfilt Protocol Filter
pruning VTP pruning
privatevlan Private VLAN facility
qos Quality of Service
radius Remote Access Dial-In User Service
rsvp ReSerVation Protocol
security Security
snmp Simple Network Management Protocol