2-638
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set summertime
set summertime
To specify whether the system should set the clock ahead one hour during daylight saving time, use the
set summertime command.
set summertime {enable | disable} [zone]
set summertime recurring [{week} {day} {month} {hh:mm} {week | day | month | hh:mm} [offset]]
set summertime date {month} {date} {year} {hh:mm} {month | date | year | hh:mm}
[offset]
Syntax Description
Defaults By default, the set summertime command is disabled. Once enabled, the default for offset is 60minutes,
following U.S. standards.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines After you enter the clear config command, the dates and times are set to default.
Unless you configure it otherwise, this command advances the clock one hour at 2:00 a.m. on th e first
Sunday in April and moves back the clock one hour at 2:00 a.m. o n the last Su nda y i n Oc tobe r.
enable Causes the system to set the clock ahead one hour during dayl igh t
saving time.
disable Prevents the system from setting the clock ahe ad o ne ho ur dur i ng
daylight saving time.
zone (Optional) Time zone used by the set summertime command.
recurring Specifies the summertime dates that recur every year.
week Week of the month (first, second, third, fourth, last, 1...5).
day Day of the week (Sunday, Monday, Tuesda y, and so forth).
month Month of the year (January, February, March, and so forth).
hh:mm Hours and minutes.
offset (O ption al) Amount of offset in minutes (from 1 to 1440 mi nutes) .
date Day of the month ( from 1 to 31).
year Number of the year ( from 1993 to 2035).