2-119
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear spantree detected-protocols
clear spantree detected-protocols To detect legacy bridges and the boundary ports of the MST region, use the clear spantree
detected-protocols command.
clear spantree detected-protocols mod/port
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The clear spantree detected-protocols command is available in MST mode and Rapid-PVST+ mode
only and is not saved in NVRAM. If you do not specify a mod/port number when you e nt er th e clear
spantree detected-protocols command, protocol detection occurs on all connected ports.
The clear spantree detected-protocols command and the set spantree mst redetect-protocol
command have the same functionality.
Examples This example shows how to set protocol detection of legacy bridges and bo undar y p or ts on po rt 2 or
module 3:
Console> (enable) clear spantree detected-protocols 3/2
Spanning tree protocol detection forced on port 3/2
Console> (enable)
Related Commands clear spantree mst
set spantree mode
set spantree mst config
mod/port Number of the module and the port on the module. See “Usage Guidelines” for more
information.