Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show accounting
2-695
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
22
To display accounting setup and configuration information on the switch, use the show accounting
command.
show accounting
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows the configuration details of a switch with RADIUS accounting enabled:
Console> (enable) show accounting
Event Method1 Mode
----- ------- -----
exec: Radius stop-only
connect: Radius stop-only
system: - -
commands:
config: - -
all: - -
TACACS+ Suppress for no username: disabled
Update Frequency: newinfo
Accounting information:
-----------------------
Active Accounted actions on tty2168059284l, User NULL Priv 15
Task ID 3, EXEC Accounting record, 0,00:00:22 Elapsed
task_id=3 start_time=934463479 timezone=UTC service=shell
Active Accounted actions on tty0l, User kannank Priv 15
Task ID 2, EXEC Accounting record, 0,00:01:23 Elapsed
task_id=2 start_time=934463418 timezone=UTC service=shell
Active Accounted actions on tty2168059284l, User danny Priv 15
Task ID 4, Connection Accounting record, 0,00:00:07 Elapsed
task_id=4 start_time=934463495 timezone=UTC service=connection protocol=telnet
addr=-1407968771 cmd=telnet 172.20.25.253