2-846
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show mls entry
show mls entry
To display state information in the MLS-based Catalyst6500 series switches, use the show mls entry
command.
show mls entry [mod] [short | long]
show mls entry ip [mod] [destination ip_addr_spec] [source ip_addr_spec]
[protocol protocol] [src-port src_port] [dst-port dst_port] [short | long]
show mls entry ipx [mod] [destination ipx_addr_spec] [short | long]
show mls entry qos [short | long]
Syntax Description
Defaults The default displays MLS information in long format.
Command Types Switch command.
Command Modes Normal.
mod (Optional) MSFC module number; valid values are 15 or 16.
short (Optional) Displays the output with carriage returns.
long (Optional) Displays the output on one line.
ip Specifies IP MLS.
destination (Optional) Specifies the destination IP or IPX address.
ip_addr_spec (Optional) Full IP address or a subnet address.
source (Optional) Specifies the source IP or IPX address.
protocol (Optional) Specifies the protocol type.
protocol (Optional) Protocol type; valid values can be 0, tcp, udp, icmp, or a
decimal number for other protocol families. 0 indicates “do not care.”
src-port src_port (Optional) Specifies the number of the TCP/UDP source port (decimal).
Used with dst-port to specify the port pair if the protocol is tcp or udp. 0
indicates “do not care.”
dst-port dst_port (Optional) Specifies the number of the TCP/UDP destination port
(decimal). Used with src-port to specify the port pair if the protocol is tcp
or udp. 0 indicates “do not care.”
ipx Specifies IPX MLS.
ipx_addr_spec (Optional) Full IPX address or a subnet address.
qos Specifies QoS.