2-85
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear qos acl
Examples This example shows how to detach an ACL from all interfaces:
Console> (enable) clear qos acl map my_acl all
Hardware programming in progress...
ACL my_acl is detached from all interfaces.
Console> (enable)
This example shows how to detach an ACL from a specific VLAN:
Console> (enable) clear qos acl map ftp_acl 4
Hardware programming in progress...
ACL ftp_acl is detached from vlan 4.
Console> (enable)
This example shows how to delete a specific ACE:
Console> (enable) clear qos acl my_ip_acl 1
ACL my_ip_acl ACE# 1 is deleted.
my_ip_acl editbuffer modified. Use ‘commit’ command to apply changes.
Console> (enable)
This example shows how to delete an ACL:
Console> (enable) clear qos acl my_ip_acl
ACL my_ip_acl is deleted.
my_ip_acl editbuffer modified. Use ‘commit’ command to apply changes.
Console> (enable)
This example shows how to detach a specific ACL from all interfaces:
Console> (enable) clear qos acl map my_acl all
Hardware programming in progress...
ACL my_acl is detached from all interfaces.
Console> (enable)
This example shows how to detach a specific ACL from a specific VLAN:
Console> (enable) clear qos acl map ftp_acl 4
Hardware programming in progress...
ACL ftp_acl is detached from vlan 4.
Console> (enable)
This example shows how to delete IP ACE default actions configured by the set qos acl default-action
command:
Console> (enable) clear qos acl default-action ip
Hardware programming in progress...
QoS default-action for IP ACL is restored to default setting.
Console> (enable)
This example shows how to clear Qos ACL mapping between a n A CL na me d “test ” and VLAN 1 on the
ingress interface:
Console> (enable) clear qos acl map test 1
Successfully cleared mapping between ACL test and VLAN 1 on input side.
Console> (enable)
Related Commands commit
rollback
set qos acl map
show qos acl editbuffer