2-271
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
set feature agg-link-partner
set feature agg-link-partner
To enable or disable the aggressiv e lin k partner featur e, use the set featur e agg-link-partner command.
set feature agg-link-partner {enable | disable}
Syntax Description
Defaults The aggressive link partner feature is disabled globally.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines When you enable this feature, you reduce the possibility of aggressive link partners causing excessive
collisions. Excessive collisions can lead to exces sive alig nment errors and runts.
The aggressive link partner feature works only on half duplex 10/100 ports.
The set feature agg-link-partner command is a global command so when you enable or d isable th is
feature, all related modules in the chassis are enabl ed or disa ble d.
Examples This example shows how to enable the aggressive link partner feature :
Console> (enable) set feature agg-link-partner enable
Aggressive link partner feature enabled.
Console> (enable)
This example shows how to disable the aggressive link partner feature:
Console> (enable) set feature agg-link-partner disable
Aggressive link partner feature disabled.
Console> (enable)
enable Enables the aggressive link partner feature.
disable Disables the aggressive link partner feature.