Cisco Systems 6500 set port sync-restart-delay

2-458
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set port sync-restart-delay
set port sync-restart-delay
To specify the synchronization restart delay of a port, use the set port sync-restart-delay command.
set port sync-restart-delay mod/port delay
Syntax Description
Defaults The default delay time is 210 milliseconds.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The more dense wavelength division multiplexing (DWDM) equipment you have in the network, usually
the longer the synchronization delay should be.
The set port sync-restart-delay and show port sync-restart-delay commands are available in both
binary mode and text configuration mode.
Use the clear config command to reset the synchronization delay to 210 milliseconds.
Related Commands clear config
show port sync-restart-delay
mod/port Number of the module and the port on the module.
delay Delay time in milliseconds; the delay range is 200 to 60000 milliseconds
(60 seconds).