2-124
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear spantree portinstancepri
clear spantree portinstancepri
To restore the default path cost to an instance on a port, use the clear spantree portinstancepri
command.
clear spantree portinstancepri mod/port [mst] [instances]
Syntax Description
Defaults The default is the port priority is set to 0 with no instances specified.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is valid in MISTP and MST modes only.
Examples This example shows how to reset the spanning tree port instance priority:
Console> (enable) clear spantree portinstancepri 5/1 2
Port 5/1 instances 1-16 using portpri 32.
Console> (enable)
This example shows how to reset the spanning tree port priority for all MST instances:
Console> (enable) clear spantree portinstancepri 8/1 mst 0-15
Port 8/1 MST Instances 0-15 using portpri 32
Console> (enable)
Related Commands set spantree portinstancepri
show spantree
mod/port Number of the module and the port on the module.
mst (Optional) Resets the spanning tree port MST instance priority.
instances (Optional) Number of the instance; valid values are from 0 to 15.