2-292
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set igmp fastleave
set igmp fastleave
To enable or disable Internet Group Management Protocol (IGMP) fastleave processing, use the
set igmp fastleave command.
set igmp fastleave {enable | disable}
Syntax Description
Defaults The default is disabled.
Command Types Switch command.
Command Modes Privileged.
Examples This command shows how to enable IGMP fastleave processing:
Console> (enable) set igmp fastleave enable
IGMP fastleave set to enable.
Warning: Can cause disconnectivity if there are more than one host joining the same group
per access port.
Console> (enable)
This command shows how to disable IGMP fastleave processing:
Console> (enable) set igmp fastleave disable
IGMP fastleave set to disable.
Console> (enable)
Related Commands clear igmp statistics
set igmp
show multicast protocols status
enable Enables IGMP fastleave processing.
disable Disables IGMP fastleave processing.