2-978
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port vtp
show port vtp To display the status of VLAN Trunk Protocol (VTP) on a per-port basis, use the show port vtp
command.
show port vtp [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines VTP v ersion 3 allows you to enable or disable VTP on a per-port basis. When a port is disabled for VTP,
it will not send or accept any VTP packets, regardless of the VTP version.
Examples This example shows how to display the status of VTP on module 2, port 1:
Console> show port vtp 2/1
Port VTP Status
-------- ----------
2/1 enabled
Console>
This example shows how to display the status of VTP on all ports on all modules:
Console> show port vtp
Port VTP Sta
-------- -------
2/1 enabled
2/2 enabled
3/1 enabled
3/2 enabled
3/3 enabled
3/4 enabled
3/5 enabled
3/6 enabled
3/7 enabled
3/8 enabled
3/9 enabled
3/10 enabled
3/11 enabled
3/12 enabled
3/13 enabled
3/14 enabled
3/15 enabled
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.