2-1171
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands
switch fabric
switch fabricTo reset the active Switch Fabric Module and allow the standby Switch Fabric Module to take over, use
the switch fabric command.
switch fabric [mNo]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported on Telnet sessions.
Examples This example shows how to reset the active Switch Fabric Module:
Console> (enable) switch fabric
This command will force a switch-over to the standby fabric module.
Do you want to continue (y/n) [n]?
Console> (enable)
mNo (Optional) Switch Fabric Module number.