2-446
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands set port qos cos
set port qos cos
To set the default value for all packets that have arrived throug h an untrusted port, use the set port qos
cos command.
set port qos mod/ports cos cos_value
set port qos mod/ports cos-ext cos_value
Syntax Description
Defaults The default is CoS 3.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines This command is not supported by the NAM.
If the default is enforced when you disable QoS, CoS is enforced when you enable QoS.
Examples This example shows how to set the CoS default value on a port:
Console> (enable) set port qos 2/1 cos 3
Port 2/1 qos cos set to 3.
Console> (enable)
This example shows how to set the CoS-ext default value on a port:
Console> (enable) set port qos 2/1 cos-ext 3
Port 2/1 qos cos-ext set to 3.
Console> (enable)
Related Commands clear port qos cos
set port qos
set port qos trust
show port qos
show qos info
mod/ports Number of the module and ports.
cos cos_value Specifies the CoS value for a port; valid values are from 0 to 7.
cos-ext
cos_value Specifies the CoS extension for a phone port; valid values are from
0 to 8.