2-702
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show authentication
show authenticationTo display authentication information, use the show authentication command.
show authentication
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Examples This example shows how to display authentication information:
Console> show authentication
Console Session Telnet Session Http Session
Login Authentication:
--------------------- ---------------- --------------- -----------
tacacs disabled disabled disabled
radius disabled disabled enabled(*)
kerberos disabled disabled disabled
local enabled(*) enabled(*) enabled
local enabled(primary) enabled(primary) enabled(primary)
attempt limit 3 3 3
lockout timeout (sec) disabled disabled disabled
Enable Authentication: Console Session Telnet Session Http Session
---------------------- ----------------- ---------------- ----------------
tacacs disabled disabled disabled
radius disabled disabled disabled
kerberos disabled disabled disabled
local enabled(primary) enabled(primary) enabled(primary)
attempt limit 3 3 3
lockout timeout (sec) disabled disabled disabled
Console>
Related Commands se t a uthe nti cati on ena ble
set authentication login