2-77
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands clear pbf vlan
clear pbf vlan
To clear PBF-enabled VLANs and remove them from NVRAM, use the clear pbf vlan command.
clear pbf vlan vlan
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines Us ing the clear pbf command does not clear the VLANs en abled for PBF. The clear pbf command does clear
the Layer 2 table entries associated with the VLANs (because the MAC address is no longer valid). You must
explicitly clear the PBF-enabled VLANs to remove them from NVRAM by entering the clear pbf vlan
vlan_list command.
You can specify a range of VLANs in the CLI.
Examples This example shows how to clear PBF on VLANs 11 and 12:
Console> (enable) clear pbf vlan 11-12
PBF disabled on vlan(s) 11-12
Console> (enable)
Related Commands set pbf vlan
show pbf
vlan VLAN number.