2-788
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show igmp ratelimit-info
show igmp ratelimit-infoTo display the IGMP rate limit for general-query packets, IGMP snooping protocol packets, and Prot ocol
Independent Multicasting version 2 (PIMv2) packets, use the show igmp ratelimit command.
show igmp ratelimit-info
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines The output of this command displays the number of IGMP rate limiting packets that are sent out every
30 seconds.
Examples This example shows how to display IGMP rate limiting information:
Console> show igmp ratelimit-info
IGMP Ratelimiting is enabled
IGMP Ratelimiting: No of messages allowed in 30 seconds
-------------------------------------------------------
Igmp General Queries : 100
Dvmrp Probes : 100
Mospf1 Hellos : 100
Mospf2 Hellos : 100
PimV2 Hellos : 100
Console>
Related Commands set igmp ratelimit