2-930
Catalyst 6500 Series Switch Command Reference—Release8.1
78-15474-01
Chapter2 Catalyst 6500 Series Switch and ROM Monitor Commands show port dot1q-ethertype
show port dot1q-ethertype
To show the status of the 802.1q Ethertype field on all or specific ports, use the show port
dot1q-ethertype command.
show port dot1q-ethertype [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a module or port number, the Ethertype field is displayed for all ports on all
modules.
Examples This example shows how to display the status of the feature on a specific port:
Console> (enable) show port dot1q-ethertype 3/2
Port Dot1q ethertype value
------ ---------------------
3/2 1234
Console> (enable)
Related Commands set trunk
mod[/port] (Optional) Number of the modu le and optionally, the number of the port on the module.