Denso RC5 manual Management of floppy disks

3.8 Precautions in repairs

4.Daily and periodical inspections

SAFETY PRECAUTIONS

(1)Do not perform repairs outside of the designated range.

(2)Under no circumstances should the interlock mechanism be removed.

(3)When opening the robot controller's cover for battery replacement or any other reasons, always turn the robot controller power off and disconnect the power cable.

(4)Use only spare tools specified in this manual.

(1)Be sure to perform daily and periodical inspections. Before starting jobs, always check that there is no problem with the robot and related equipment. If any problems are found, take any necessary measures to correct them.

(2)When carrying out periodical inspections or any repairs, maintain records and keep them for at least 3 years.

5.Management of floppy disks

(1)Carefully handle and store the "Initial settings" floppy disks packaged with the robot, which store special data exclusively prepared for your robot.

(2)After finishing teaching or making any changes, always save the programs and data onto floppy disks.

Making back-ups will help you recover if data stored in the robot controller is lost due to the expired life of the back-up battery.

(3)Write the names of each of the floppy disks used for storing task programs to prevent incorrect disks from loading into the robot controller.

(4)Store the floppy disks where they will not be exposed to dust, humidity and magnetic field, which could corrupt the disks or data stored on them.