Freescale Semiconductor Microcontrollers Register Component

Debugger Components
General Debugger Components
111 Microcontrollers Debugger Manual
In Listing 3.2, an .abs file is loaded, a breakpoint is set, the assembly component is
configured to display the code and addresses. The Data1 component display is switched to
local variables, and the application starts and stops at the breakpoint.
Listing 3.2 Record File Example
at 4537 load C:\Freescale\DEMO\fibo.abs
at 9424 bs 0x1040 P
at 11917 Assembly < attributes code on
at 14481 Assembly < attributes adr on
at 20540 Data:1 < attributes scope local
at 24425 g
wait ;s
Drag Out
Nothing can be dragged out.
Drop Into
Nothing can be dropped in.
Demo Version Limitations
Only 20 commands are recorded and replayed.
Register Component
The Register window, shown in Figure 3.56, displays the content of registers and status
register bits of the target processor.
Figure 3.56 Register Window
Register values can be displayed in binary or hexadecimal format. These values are
editable.