Freescale Semiconductor Microcontrollers Step 10 - Run

ColdFire V1 Full Chip Simulation Connection
FCS Tutorials
661 Microcontrollers Debugger Manual
void main(void) {
/*** Processor Expert internal initialization. DON'T REMOVE THIS
CODE! ***/
PE_low_level_init();
/*** End of Processor Expert internal initialization. ***/
/*Write your code here*/
GuessTheNumber();
/***Processor Expert end of main routine. DON'T MODIFY THIS CODE!***/
for(;;);
/***Processor Expert end of main routine. DON'T WRITE CODE BELOW!***/
} /*** End of main routine. DO NOT MODIFY THIS TEXT! ***/
Step 10 - Run
The application is now complete and we can launch it. Make sure you have chosen the
Full Chip Simulation connection.
1. Select the Debug icon in the Project Manager window (or the menu bar Project >
Debug or [F5]).
If there are compilation errors, correct your source code and try again.
2. In the Debugger, select Component > Open in the debugger and open the Terminal
component.
3. From the context menu of the Terminal window select Configure Connections and
change the name of the SCI peripheral to SCI1 (the SCI you chose in the previous
Processor Expert bean configuration).