Freescale Semiconductor Microcontrollers SCDO Command

HCS08 Full Chip Simulation
Peripheral Modules Commands
456 Microcontrollers Debugger Manual
Example
>SCDI $55
Set the next input value to the SCI to $55
>SCDI
Pull up the data window with all the input values.
Figure 18.29 SCI IN buffer display
SCDO Command
The SCDO command displays the output buffer from the SCI. A window is opened that
shows all the data that the SCI has shifted out. An arrow is used to point to the last output
value transmitted. The maximum number of output values that the buffer holds is 256
bytes.
Syntax
>SCDO
Example
>SCDO
View data from the output buffer for the SCI simulation.
Figure 18.30 SCI OUT Buffer Display