Freescale Semiconductor Microcontrollers Example 3:

Debugger Engine Commands
Debugger Commands
801 Microcontrollers Debugger Manual
i 0x3 (3)
!ENDFOR
When commands executed from a command file are logged, all executed
commands that are in the WHILE loop are logged the number of times they have
been executed. That is, a command file executed with the CF or CALL command
without the NL option and with the CMDFILE flag of the LOG command set to
TRUE.
Example 3:
When executing the following file:
define i = 1
WHILE i < 3
define i = i + 1
ls
ENDWHILE
The following log file is generated:
!define i = 1
!WHILE i < 3
! define i = i + 1
! ls
i 0x2 (2)
!ENDWHILE
! define i = i + 1
! ls
i 0x3 (3)
!ENDWHILE
When commands executed from a command file are logged, all executed
commands that are in the REPEAT loop are logged the number of times they have
been executed. That is, a command file executed with the CF or CALL command
without the NL option and with the CMDFILE flag of the LOG command set to
TRUE.