Debugger Components
Visualization Utilities
144
Microcontrollers Debugger Manual
Paste Edit mode Adds instruments, which are temporary stored in the
clipboard, to the workspace.
Shortcut: Ctrl + V
Send to Back At least one
selection
Sends current instrument to the back of the Z-order.
Send to Front At least one
selection
Brings current instrument to the front of the Z-order.
Clone
Attributes
More than
one
selection
Clones common attributes to all selected instruments
according to the last selected.
Shortcut: <Ctrl + Enter>
Align At least two
selections
Gives access to a new menu for alignment.
Top Align Aligns instruments to the top line of the last selected
instrument.
Bottom Align Aligns instruments to the bottom line of the last
selected instrument.
Left Align Aligns instruments to the left line of the last selected
instrument.
Right Align Aligns instruments to the right line of the last selected
instrument.
Size Align Makes size of all selected instruments the same as the
last selected.
Vertical Size Align Makes vertical size of all selected instruments the
same as the last selected.
Horizontal
Size
Align Makes horizontal size of all selected instruments the
same as the last selected.
Table 3.44 VisualizationTool Context Menu (
continued
)