Freescale Semiconductor Microcontrollers DILSwitch Instrument, Knob Instrument

Debugger Components
Visualization Utilities
149 Microcontrollers Debugger Manual
flasher is on, while bit 1 says that the brake light is on. So for your simple application you
need the following bitmaps with their settings:
• No light on bitmap: AND mask 3, EQUAL mask 0
• Flasher on bitmap: AND mask 3, EQUAL mask 1
• Brake light on bitmap: AND mask 3, EQUAL mask 2
• Brake and flasher light on: AND mask 3, EQUAL mask 3
DILSwitch Instrument
The DILSwitch instrument is also known as Dual-in-Line Switch (Figure 3.91). It is
mainly used for configuration purposes. You can use it for viewing or setting bits of one to
four bytes.
Figure 3.91 DILSwitch Instrument
DILSwitch instrument attributes are listed in Table 3.50.
Knob Instrument
The Knob instrument is normally known as an adjustment instrument. For example, it can
simulate the volume control of a radio (Figure 3.92).
Figure 3.92 Knob Instrument
Knob instrument attributes are shown in Table 3.51
Table 3.50 DILSwitch Instrument Attributes
Attribute Description
Display 0/1 When enabled, displays the value of the bit under each plot of
the DILSwitch instrument.
Switch Color Specifies the color of the switch.