Freescale Semiconductor Microcontrollers In the Data Component

Debugger Engine Commands
Debugger Commands
748 Microcontrollers Debugger Manual
• ATTRIBUTES SMOD ~ Drag and drop from Module component to Source
component.
• ATTRIBUTES SPROC ~ Drag and drop from Procedure component to Source
component.
• ATTRIBUTES MARKS ~ Select menu Source > Marks.
Usage
ATTRIBUTES list
where list=command{,command}
command= SPC address |
SMEM range |
SMOD module (without extension) |
SPROC numberAssociatedToProcedure |
MARKS (ON|OFF)
Example
in>Source < ATTRIBUTES MARKS ON
Marks are visible in the Source component window.
In the Data Component
The ATTRIBUTES command allows you to set the display and state options of
the Data component window. The FORMAT command selects the format for the
list of variables. The format is one of the following: binary, octal, hexadecimal,
signed decimal, unsigned decimal or symbolic.
Usage
ATTRIBUTES list
where list=command{,command})
command=FORMAT(bin|oct|hex|signed|unsigned|symb)| S
COPE (global|local|user) |
MODE (automatic|periodical| locked|frozen) |
SPROC level |
SMOD module |
UPDATERATE rate |
COMPLEMENT(none|one)|
NAMEWIDTH width