Freescale Semiconductor Microcontrollers - page 489

HCS08 Serial Monitor Connection
First Steps from Within an Existing Project
489 Microcontrollers Debugger Manual
First Steps from Within an Existing Project
To take the first steps toward debugging with CodeWarrior IDE and setting the HCS08
Serial Monitor connection from within an existing debugging project:
1. Run the CodeWarrior IDE with the shortcut created in the program group.
2. Open the existing project.
3. Choose the menu Project > Debug to start the debugger - debugger main window
opens.
4. In the debugger main window, from the Component menu, choose Component > Set
Connection to select another connection.
Figure 21.2 Set Connection Dialog Box - HCS08 Serial Monitor Selection
5. Select HCS08 as the Processor then HCS08 Serial Monitor as the connection in the
Set Connection dialog box.
6. Click the OK button.
7. Now in the Monitor Setup window, Monitor Communication tab, choose the correct
Host serial communication port if necessary.