Freescale Semiconductor Microcontrollers Trigger Module Settings Option

HCS08 P&E Multilink/Cyclone Pro Connection
Connection Procedure
474 Microcontrollers Debugger Manual
Figure 19.9 Choose A Register Block Window
If register files have been installed on the host computer, selecting a block brings up the
Register Block register listing (see Figure 19.10), which shows a list of the associated
registers, their addresses, and their descriptions. This begins interactive setup of system
registers such as I/O, timer, and COP watchdog.
Figure 19.10 Register Block Register Listing
Selecting a file brings up the Register Window (see Figure 19.11), which displays the
values and significance for each bit in the register. The registers can be viewed and their
values modified, and the values can be stored back into debugger memory.
Figure 19.11 Register Window
Trigger Module Settings Option
For more information about the Trigger Module Settings menu option, see Trigger Module
Settings Window.