Freescale Semiconductor Microcontrollers - page 366

HC08 P&E Multilink/Cyclone Pro Connection
Connection Procedure
366 Microcontrollers Debugger Manual
Figure 14.2 P&E Connection Manager Window - Connect to Target Tab
4. The device power selection allows the user to specify whether the target is 2, 3, or 5
Volts, and whether this power is switched/generated by the P&E interface or if it is
separately supplied to the target and under user control. If it is under user control, the
software uses dialog boxes to ask the user to power the target up and down when
necessary (similar to Class II-IV). See Figure 14.3.
Figure 14.3 Device Power Selection List
Figure 14.4 HC08 Device Clock Selection Box
5. The device clock menu allows two options, as shown in Figure 14.4.
• P&E provides clock to target
• The device has its own clock
6. Click on Refresh, which displays all P&E devices that are automatically detected, such
as Cyclone Pro USB, Cyclone Pro Ethernet and USB-ML-MON08 Multilink. See
Figure 14.2.