Debugger Components
General Debugger Components
113
Microcontrollers Debugger Manual
Drag Out
Table 3.31 contains the drag actions possible from the Register window.
Drop Into
Table 3.32 shows the drop actions possible into the Register component.
Table 3.30 Register Menu Description
Menu Entry Description
Hex Selects the hexadecimal register display format
Bin Selects the binary register display format
Oct Selects the octal register display format
Dec Selects the signed decimal register display format
UDec Selects the unsigned decimal register display format
Float Selects the float register display format (all 32/64 bit registers are
displayed as floats, all others as hex)
Auto Selects the auto register display format (all floating point 32/64 bit
registers are displayed as floats, all others as hex)
Bit Reverse Selects the bit reverse data display format (Each bit is reversed).
Table 3.31 Register Component Drag Possibilities
Destination
Component Window
Action
Assembly Assembly component receives an address range, scrolls
up to the corresponding instruction and highlights it.
Memory Dumps memory starting at the address stored in the
selected register. The corresponding address is selected
in the memory component.
Command Line The address stored in the pointed to register is appended
to the current command.