RS08 Full Chip Simulation
Configuration Procedure
549
Microcontrollers Debugger Manual

Full Chip Simulation Module Commands

The RS08FCS Menu contains the Full Chip Simulation commands for the modules that
have specialty commands associated with them for a chosen device. For more information
about specific module commands refer to the Full Chip Simulation section describing the
module.

Port Pins Module

Figure 24.4 shows the simulated port inputs dialog box.
Figure 24.4 Simulated Port Inputs Dialog Box
The port pins module menu contains the option to show the input pin levels dialog box
(this corresponds to the INPUTS command). The dialog box graphically displays the
current value of the inputs buffers for all available I/O ports on the device (note that this
may not reflect the value shown in the memory window, depending on the current state of
a given port’s data direction register).
The input buffer can be directly modified from this dialog box.

Modify MTIM TCLK

Figure 24.5 shows the TCLK frequency dialog box.
Figure 24.5 TCLK Frequency Dialog Box
This dialog box allows the user to set the frequency of the TCLK signal for the MTIM
peripheral. In order for this value to have any effect, the TCLK must be selected as the
clock source for the MTIM.